Bruxton ®
|
SIDXSIDX provides an interface between scientific cameras, common instrumentation, and imaging software. Hardware users who want to fully access the capabilites of their devices can use SIDX to get started quickly and easily.
version 7
|
|
|
|
|
|
|
|
Downloading SIDX 7
Contact Bruxton Corporation to purchase SIDX and obtain a ZIP file.
Follow the SIDX Installation Instructions once you have obtained the ZIP file.
Downloading SIDX 6
SIDX is downloadable with an electronic key.
Contact Bruxton Corporation to purchase SIDX and obtain a key.
Download the SIDX installer once you have obtained a key.
Version 7
Motorized Stage specific functions are currently untested.
Support for Microsoft Visual Studio .NET is currently unavailable.
Support for an ImageJ plug-in is currently unavailable.
Support for WaveMetrics IGOR Pro is only available for 32-bit operating systems.
Version 6
For details about SIDX, please refer to the online manual.
QImaging camera triggering
We believe that the trigger connector pinout in the QImaging manual is not correct. The pinout shown does correspond to the Singatron 62000-6P, as specified. However, the signals appear to be mirrored left/right, for example, we find that the signal shown as on pin 5 appears on pin 6. Please confirm for yourself when using the camera trigger connector. You may want to place a current-limiting resistor on the 5V connection when testing, to avoid potentially damaging the camera.
Multi-threading
It is essential that an application using SIDX calls SIDX from only one thread. If an application calls SIDX from more than one thread, SIDX will fail under some conditions with some camera drivers.
|
Copyright ® 2003-2010 Bruxton Corporation. All rights reserved.